Karbid wolframu opotřebení dílů
Wolframcarbid slid dele
Wolfraamcarbide slijtdelen
Tungsten carbide wear parts
Pièces d
Hartmetall-Verschleißteile
Parti di usura in carburo di tungsteno
Wolframkarbid slitasje deler
Peças de desgaste de carboneto de tungsténio
Piese de uzură carbură de tungsten
Частей износа из карбида вольфрама
Partes de desgaste de carburo de tungsteno
Volframkarbid slitage delar
Tungsten karbür aşınma parçaları
 
wolfraamcarbide

Wolfraamcarbide slijtdelen

Wolfraamcarbide slijtdelen Wolfraamcarbide slijtdelen Wolfraamcarbide slijtdelen

Grade

Density (g/cm3)

Hardness HRA

Properties

Application

YG3X

?15.0-15.3

92

Having the highest wear-resistance, but the toughness is the worst

For the drawing of cast-iron and fine wire and the wear-resistance is superior.

YG4C

14.9-15.2

90

Belonging the coarse tungsten carbide, the wear-resistance is higher than YG8S.

For geological prospecting, coal mining, tipping of electric and air drill for coal bed.

YA6

14.4-15.0

92

Belonging the fine tungsten carbide, having more advantages than YG6X.

For the semi-fine machining of hard cast-iron {~} ferrous metal and alloy.

YG6

14.6-15.0

89.5

Having higher wear-resistance, but lower than YG3X.

For cast-iron, rough turning of threads, spiral turning and coarse {~} fine boring of holes.

YG6X

14.6-15.0

91

Belonging the fine tungsten carbide, having higher wear-resistance.

For machining cast-iron and thermal-resistance alloy, plain cast-iron, for making timber cutters.

YG8

14.4-14.8

89

Having higher strength and the shock-resistance is better than YG6.

For rough turning, planning, milling and electric drill bits.

YG11C

14.0-14.4

87

Belonging the coarse tungsten carbide, the strength is a little worse than YG15.

For heavy rock drill bits.

YG15

13.9-14.1

87

The strength is higher than the above grades, but the wear-resistance is lower than the above grades.

For drawing and stamping dies.

YG20

13.4-13.5

89

Having the highest strength and best shock-resistance.

For making dies and cutters used under big shock and stress.

YT5

12.5-13.2

89.5

Having the best shock-resistance and vibration-resistance and the worse wear-resistance.

For machining of non-plain face for carbon steel and rough turning for incontinuous turning.

YT14

11.2-12.7

90.5

Having a little worse vibration-resistance than YT5, but the wear-resistance is higher than YT5.

For continuous rough milling, cast-irons boring and rough boring.

YT15

11.0-11.7

91

Having a worse vibration-resistance than YT14.

For carbon steels semi-fine {~}fine turning, spiral turning, semi-fine {~}fine milling.

YT30

9.3-59.7

92.8

Having higher wear-resistance and allowing faster cutting speed, the shock-resistance and vibration-resistance is worse.

For carbon steels fine turning and fine-boring.

YW1

13.0-13.3

91

Having a higher hardness at high temperature, is a kind of universal hard metal.

For machining abrasion resisting steel, manganese steel, stainless-steel, plain steel and cast-iron.

YW2

12.4-13.5

90.5

Having a higher strength, bearing a bigger shock capacity.

For rough machining and semi-fine machining abrasion resisting steel, manganese steel, stainless-steel, high-grade steel.

Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : ebiz@ctia.com.cn
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved