Tungsten alloy plate
Tungsten Alloy Plate Introduction
1, width×Length: (2.0-250.0mm)×(2.0-250.0mm)
2, thickness: 2mm-15mm
3, Density: 15.8-18.75 g/cm3
4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5, Surface: Sintering surface, Forged surface, Ground surface
Tungsten alloy plate is produced by good processing property billets and special cold and hot rolling technology; they can be used to make tungsten target, tungsten heat elements, tungsten radiation shields and tungsten boats for electronics, lightening, electro-vacuum industries.
Tungsten alloy plate play important role in manufacturing of collimator for nuclear medicine, nuclear research, geologging and homeland security. These materials provide reliable protection against X-rays and gamma radiation.
Tungsten Alloy Data Sheet
|
Type |
Density (g/cm³) |
Tensile strength (MPa) |
Elongation |
Hardness (HRC) |
| 85W-10.5Ni-4.5Fe | 15.8-16.0 | 700-1000 | 20-33 | 20-30 |
| 90W-7Ni-3Fe | 16.9-17.1 | 700-1000 | 20-33 | 24-32 |
| 90W-6Ni-4Fe | 16.7-17.0 | 700-1000 | 20-33 | 24-32 |
| 91W-6Ni-3Fe | 17.1-17.3 | 700-1000 | 15-28 | 25-30 |
| 92W-5Ni-3Fe | 17.3-17.5 | 700-1000 | 18-28 | 25-30 |
| 92.5W-5Ni-2.5Fe | 17.4-17.6 | 700-1000 | 25-30 | 25-30 |
| 93W-4Ni-3Fe | 17.5-17.6 | 700-1000 | 15-25 | 26-30 |
| 93W-4.9Ni-2.1Fe | 17.5-17.6 | 700-1000 | 15-25 | 26-30 |
| 93W-5Ni-2Fe | 17.5-17.6 | 700-1000 | 15-25 | 26-30 |
| 95W-3Ni-2Fe | 17.9-18.1 | 700-900 | 8-15 | 25-35 |
| 95W-3.5Ni-1.5Fe | 17.9-18.1 | 700-900 | 8-15 | 25-35 |
| 96W-3Ni-1Fe | 18.2-18.3 | 600-800 | 6-10 | 30-35 |
| 97W-2Ni-1Fe | 18.4-18.5 | 600-800 | 8-14 | 30-35 |
| 98W-1Ni-1Fe | 18.4-18.6 | 500-800 | 5-10 | 30-35 |
| 90W-6Ni-4Cu | 17.0-17.2 | 600-800 | 4-8 | 25-35 |
| 93W-5Ni-2Cu | 17.5-17.6 | 500-600 | 3-5 | 25-35 |
Note: The specification and composition of tungsten alloy plate can be self-defined by customer.
Related Links
Tungsten Targets
Tungsten Sheet
Material Safety Data Sheet of Tungsten Alloy
Material Safety Data Sheet of Tungsten Alloy (PDF)
Catalog of Tungsten Alloy Products (PDF)