Tungsten carbide die

Tungsten carbide is a class of materials widely used in drawing dies because of their superior strength, toughness, and wear resistance.

Tungsten carbide punches and dies, well supported and properly aligned, is satisfactory for blanking and punching. Good ferrous and non-ferrous wire is drawn through a series tungsten carbide dies in a process of elongating and reducing the wire's diameter.

Recommended Grade for tungsten carbide dies: YG6, YG8, YG6X, YG8X, YG15, YG20C, YD40, YD45 etc.

Our company has in its possession an advanced production line for manufacturing dies and moulds and a production line for post machined cemented carbide products. We have kinds of standard or nonstandard model blanks with plus or minus tolerance and plus or minus high tolerance. We can also supply tailor-made products of various specifications based on the requirements of our customers.
Our growth to a position of the market dominance in the wire die industry is because we strive to provide more than just the world's finest carbide draw dies.
We continually improve and expand the capabilities of our tungsten carbide draw dies. By controlling the fabrication of all our own tooling onsite, we're able to provide carbide die blanks to any specific hole size at any time.

Type S11 drawing dies

Type	Dimensions (mm)
Type	D	d	H	h	h1	h2	R
S11-1.6-15	15	1.6	13	1.5	1.5	2.2	3
S11-2.0-15	15	2.0	13	1.5	1.5	2.2	3
S11-2.3-15	15	2.3	13	1.5	1.5	2.2	3
S11-2.8-15	15	2.8	13	1.5	1.5	2.2	3
S11-2.0-19	19	2.0	15.5	2.3	1.5	6.5	3
S11-2.3-19	19	2.3	15.5	2.3	1.5	6.5	3
S11-4.2-19	19	4.2	15.5	2.6	1.5	6.5	3
S11-4.7-19	19	4.7	15.5	2.6	1.5	6.5	3
S11-5.2-19	19	5.2	15.5	3.0	1.5	6.5	3
S11-5.2-20	20	5.2	16.5	3.0	2.5	7	5
S11-5.7-20	20	5.7	16.5	3.0	2.5	8	5
S11-6.0-20	20	6.0	16.5	3.0	2.5	8	5
S11-2.3-21	21	2.3	17	1.4	2.5	8	5
S11-4.2-21	21	4.2	17	1.8	2.5	8	5
S11-4.7-21	21	4.7	17	1.8	2.5	8	5
S11-5.2-21	21	5.2	17	3.0	2.5	8	5
S11-5.7-21	21	5.7	17	3.0	2.5	8	5
S11-6.0-21	21	6.0	17	3.0	2.5	8	5
S11-4.0-22	22	4.0	18	1.6	2.5	6.0	5
S11-4.2-22	22	4.2	18	1.8	2.5	6.0	5
S11-4.5-22	22	4.5	18	1.8	2.5	6.0	5
S11-4.7-22	22	4.7	18	1.8	2.5	6.0	5
S11-4.9-22	22	4.9	18	1.8	2.5	6.0	5
S11-5.2-22	22	5.2	18	2.0	2.5	6.0	5
S11-5.4-22	22	5.4	18	2.6	2.5	7.0	5
S11-5.7-22	22	5.7	18	2.8	2.5	6.0	5
S11-6.0-22	22	6.0	18	3.0	2.5	8	4

Type S13 drawing dies

Type	Dimensions(mm)
Type	D	d	H	h	h1	h2	α'
S13-29-70	70	29.5	35	8	6	9	20
S13-30-70	70	30.5	35	8	6	9	20
S13-31-70	70	31.5	35	8	6	9	20
S13-32-70	70	32.5	35	8	6	9	20
S13-33-70	70	33.5	35	8	6	9	20
S13-34-75	75	34.5	35	8	6	9	20
S13-35-75	75	35.5	35	8	6	9	20
S13-36-75	75	36.5	35	8	6	9	20
S13-37-75	75	37.5	35	8	6	9	20
S13-38-75	75	38.5	35	8	6	9	20
S13-39-75	75	39.5	35	8	6	9	20
S13-40-75	75	40.5	35	8	6	9	20
S13-41-75	75	41.5	35	8	6	9	20
S13-42-75	75	42.5	35	8	6	9	20
S13-43-75	75	43.5	35	8	6	9	20
S13-44-75	75	44.5	35	8	6	9	20
S13-45-80	80	45	35	9	6	10	22
S13-45-90	90	45	35	9	6	10	22
S13-47-90	90	47	35	9	6	10	22
S13-49-90	90	49	35	9	6	10	22
S13-51-90	90	51	35	9	6	10	22
S13-53-90	90	53	35	9	6	10	22
S13-55-90	90	55	35	10	6	10	22
S13-59-110	110	59	40	10	6	10	22
S13-61-110	110	61	40	10	6	10	22
S13-64-110	110	64	40	11	6	10	22
S13-65-110	110	65	40	11	6	10	22

Type 22 drawing dies

Type	Dimensions(mm)
Type	D	d	H	h	h1	r	R
22-47-87	87	47	35	6.5	5.0	2.5	10
22-49-87	87	49	35	6.5	5.0	2.5	10
22-51-87	87	51	35	6.5	5.0	2.5	10
22-55-97	97	55	40	6.5	5.0	2.5	10
22-57-97	97	57	40	6.5	5.0	2.5	10
22-59-105	105	59	40	6.5	5.0	2.5	10
22-61-105	105	61	40	6.5	5.0	2.5	10
22-59-115	115	59	45	6.5	5.0	2.5	10
22-60-115	115	60	45	6.5	5.0	2.5	10
22-62-115	115	62	45	6.5	5.0	2.5	10
22-64-115	115	64	45	6.5	5.0	2.5	10
22-67-115	115	67	45	6.5	5.0	2.5	10
22-70-125	125	70	50	6.5	5.0	2.5	10
22-72-125	125	72	50	6.5	5.0	2.5	10
22-74-125	125	74	50	6.5	5.0	2.5	10
22-76-125	125	76	50	6.5	5.0	2.5	10
22-78-125	125	78	50	6.5	5.0	2.5	10
22-79-135	135	79	50	6.5	5.0	2.5	10
22-82-135	135	82	50	6.5	5.0	2.5	10
22-85-135	135	85	47	6.5	5.0	2.5	10
22-84-138	138	84	50	6.5	5.0	2.5	10
22-86-138	138	86	50	6.5	5.0	2.5	10
22-88-140	140	88	50	6.5	5.0	2.5	10
22-89-150	150	89	50	6.5	5.0	2.5	10
22-91-150	150	91	50	6.5	5.0	2.5	10
22-93-150	150	93	50	6.5	5.0	2.5	10
22-98-160	160	98	50	6.5	5.0	2.5	10
22-107-160	160	107	50	6.5	5.0	2.5	10
22-138-200	200	138	55	9	6	2.5	10
22-177-250	250	177	65	13	7	2.5	15
22-201-270	270	201	65	13	10	5.0	15
22-217-300	300	217	75	13	10	5.0	15
22-243-310	310	243	75	13	10	5.0	15

Type 23 drawing dies

Type	Dimensions(mm)
Type	D	d	H	h	h1	R
23-31-68	68	31	40	15	2.5	35
23-33-68	68	33	40	15	2.5	35
23-34-68	68	34	40	15	2.5	35
23-35-68	68	35	40	15	2.5	35
23-36-68	68	36	40	15	2.5	35
23-37-68	68	37	40	15	2.5	35
23-38-72	72	38	42	15	2.5	35
23-40-72	72	40	42	15	2.5	35
23-40-82	82	40	42	15	2.5	35
23-42-82	82	42	42	15	2.5	35
23-44-82	82	44	42	15	2.5	35
23-46-82	82	46	42	15	2.5	35
23-48-95	95	48	47	18	2.5	40
23-50-95	95	50	47	18	2.5	40
23-52-95	95	52	47	18	2.5	40
23-54-95	95	54	47	18	2.5	40
23-54-105	105	54	47	18	3	40
23-56-105	105	56	47	18	3	40
23-58-105	105	58	47	18	3	40
23-60-105	105	60	47	18	3	40
23-62-105	105	62	47	18	3	40
23-64-105	105	64	47	18	3	40
23-66-120	120	66	52	19	3	40
23-68-120	120	68	52	19	3	40

Forging dies and cold punching dies

Type	Dimensions(mm)
Type	D	d	H
BD01010	10	1.0	12~20
BD01510	10	1.5	12~20
BD01512	12	1.5	12~25
BD01513	13	1.5	12~25
BD02013	13	2.0	15~25
BD02014	14	2.0	15~30
BD02516	16	2.5	15~30
BD03018	18	3.0	15~40
BD04020	20	4.0	20~45
BD05022	22	5.0	25~45
BD06422	22	6.4	25~45
BD06925	25	6.9	25~45
BD08025	25	8.0	25~50
BD08230	30	8.2	30~60
BD09230	30	9.2	30~60
BD10035	35	10.0	30~60
BD12036	36	12.0	30~65
BD11840	40	11.8	35~65
BD13840	40	13.8	35~65
BD12042	42	12.0	35~65
BD13045	45	13.0	35~65
BD17050	50	17.0	35~65
BD17055	55	17.0	35~65
BD20060	60	20.0	35~65
BD25060	60	25.0	40~65
BD30065	65	30.0	40~70
BD35070	70	35.0	40~75